Pat Manley and Oliver Ballam demystify boat electrics and explain how to use and make secure electrical wiring connections
practical
Engine revs sliding away: PBO’s engine whisperer has the answer!
Phil Symonds is struggling to find out why the engine revs on his yacht keep falling away. PBO's Stu Davies has the answer
How to make a boat fridge: step by step
Keith Calton converts an under-seat locker into a bespoke boat fridge for under £450
How to become a boat builder in 40 weeks
Inspired by a stunning homebuilt yacht, Ali Wood visits the Boat Building Academy to learn how any of us can become boatbuilders
Bilge pump troubleshooting: getting the float activation switch to work
Zoran Glozinic does a bit of bilge pump troubleshooting to try and work out why the float-activated switch on his automatic pump won't work
Understanding boat electrics: switches and relays
Pat Manley and Oliver Ballam demystify boat electrics, starting with switches and relays
DIY chartplotter for £200: how to build one at home
John Calton builds his own 10in touchscreen DIY chartplotter with GPS and AIS for a fraction of the cost of an off-the-shelf system
Magnetic mousing for easy wire installation
Winston Collinge uses an easy and attractive way to feed a cable through the length of his mast
Transom repair for a hard tender: step-by-step
Jake Frith explains how to carry out a transom repair for many more years of trouble free service
How do you close the gap between the rudder and propeller?
Practical Boat Owner reader David Blackborow is trying to find out the best way to close the gap between the rudder and propeller on his boat
Repairing a broken boat wind generator
Andy Pag takes apart a Rutland WG1200 turbine to see if he can get it turning smoothly again
How to install boat portholes
Phil Taylor reduces the size of the windows on his Sabre 27 by fitting portholes for offshore sailing
Securing mast cable on our Maxi 84
With the help of ACM Marine, Ali Wood goes about securing mast cable on the Maxi 84 PBO project boat
How to choose the right project boat
How do you distinguish a real bargain boat from one that’s not worth restoring, even if it’s free? Rupert Holmes has some sage advice
Home-built boat: From design research to launch
Chris Comerie uses retirement to fulfil a teenage boatbuild ambition, resulting in a trailable gaff-slooped pocket cruiser
How to choose the right electric outboard engine
Marine electrician Jamie Marley explains what you should look out for when choosing an electric outboard engine for your type of cruising
How do I tell if an old boat engine is beyond repair?
Is it worth buying a boat with a non-running engine? Vyv Cox has some tips on what to look for before deciding if it’s a viable project
Boat exhaust temperature alarm: how to fit one to your boat
Gilbert Park installs a temperature monitor and alarm to prevent costly exhaust hose damage in the event of impeller failure
Marine alternator troubleshooting
Ali Wood gets to grips with Maximus’s faulty electrical system after some unexpected failures made an appearance on passage
Refurbishing a boat alternator
James Wood removes Maximus’s alternator and gets it repaired